'프로그래밍/MDSN'에 해당되는 글 2건

  1. 2009.03.02 [클래스] CObList
  2. 2009.02.16 SetWindowPos

클래스는 컬렉션 클래스로 링크드 리스트를 구현한 클래스이다.
따라서 CObject로부터 계승된 모든 클래스는 이 컬렉션 클래스의 적용
대상이 된다.

주요 멤버 함수로는 아래와 같다.

class CObList : public CObject


▷ CObList::AddHead - 헤드로 요소를 더함.
▷ CObList::CObList - 비어 있는 리스트를 구성.
▷ CObList::GetAt - 주어진 위치에서 요소를 얻음.
▷ CObList::GetHead - 헤드 요소를 반환.
▷ CObList::GetNext - 반복을 위한 요소를 얻음.
▷ CObList::GetPrev - 이전의 요소를 얻음.
▷ CObList::IsEmpty - 빈 리스트 상태를 테스트함.
▷ CObList::RemoveAll - 모든 요소를 제거.
▷ CObList::RemoveAt - 한 요소를 제거.


위 자료의 출처 : http://kin.naver.com/detail/detail.php?d1id=1&dir_id=10104&eid=IuVUJA9nZFYbYJerQH6ohtb9Ayp6MB7t&qb=Q09iTGlzdA==&enc=utf8&pid=fjXdldoi5U4ssZ/bdQZsss--134044&sid=SauQgTKLq0kAABxuE@8
 

Posted by +깡통+
2009. 2. 16. 13:14

We were unable to locate this content in ko-kr.

Here is the same content in en-us.

SetWindowPos Function

Changes the size, position, and Z order of a child, pop-up, or top-level window. These windows are ordered according to their appearance on the screen. The topmost window receives the highest rank and is the first window in the Z order.

Syntax

BOOL SetWindowPos(      
    HWND hWnd,     HWND hWndInsertAfter,     int X,     int Y,     int cx,     int cy,     UINT uFlags );

Parameters

hWnd
[in] A handle to the window.
hWndInsertAfter
[in] A handle to the window to precede the positioned window in the Z order. This parameter must be a window handle or one of the following values.
HWND_BOTTOM
Places the window at the bottom of the Z order. If the hWnd parameter identifies a topmost window, the window loses its topmost status and is placed at the bottom of all other windows.
HWND_NOTOPMOST
Places the window above all non-topmost windows (that is, behind all topmost windows). This flag has no effect if the window is already a non-topmost window.
HWND_TOP
Places the window at the top of the Z order.
HWND_TOPMOST
Places the window above all non-topmost windows. The window maintains its topmost position even when it is deactivated.
For more information about how this parameter is used, see the following Remarks section.
X
[in] Specifies the new position of the left side of the window, in client coordinates.
Y
[in] Specifies the new position of the top of the window, in client coordinates.
cx
[in] Specifies the new width of the window, in pixels.
cy
[in] Specifies the new height of the window, in pixels.
uFlags
[in] Specifies the window sizing and positioning flags. This parameter can be a combination of the following values.
SWP_ASYNCWINDOWPOS
If the calling thread and the thread that owns the window are attached to different input queues, the system posts the request to the thread that owns the window. This prevents the calling thread from blocking its execution while other threads process the request.
SWP_DEFERERASE
Prevents generation of the WM_SYNCPAINT message.
SWP_DRAWFRAME
Draws a frame (defined in the window's class description) around the window.
SWP_FRAMECHANGED
Applies new frame styles set using the SetWindowLong function. Sends a WM_NCCALCSIZE message to the window, even if the window's size is not being changed. If this flag is not specified, WM_NCCALCSIZE is sent only when the window's size is being changed.
SWP_HIDEWINDOW
Hides the window.
SWP_NOACTIVATE
Does not activate the window. If this flag is not set, the window is activated and moved to the top of either the topmost or non-topmost group (depending on the setting of the hWndInsertAfter parameter).
SWP_NOCOPYBITS
Discards the entire contents of the client area. If this flag is not specified, the valid contents of the client area are saved and copied back into the client area after the window is sized or repositioned.
SWP_NOMOVE
Retains the current position (ignores X and Y parameters).
SWP_NOOWNERZORDER
Does not change the owner window's position in the Z order.
SWP_NOREDRAW
Does not redraw changes. If this flag is set, no repainting of any kind occurs. This applies to the client area, the nonclient area (including the title bar and scroll bars), and any part of the parent window uncovered as a result of the window being moved. When this flag is set, the application must explicitly invalidate or redraw any parts of the window and parent window that need redrawing.
SWP_NOREPOSITION
Same as the SWP_NOOWNERZORDER flag.
SWP_NOSENDCHANGING
Prevents the window from receiving the WM_WINDOWPOSCHANGING message.
SWP_NOSIZE
Retains the current size (ignores the cx and cy parameters).
SWP_NOZORDER
Retains the current Z order (ignores the hWndInsertAfter parameter).
SWP_SHOWWINDOW
Displays the window.

Return Value

If the function succeeds, the return value is nonzero.

If the function fails, the return value is zero. To get extended error information, call GetLastError.

Remarks

As part of the Vista re-architecture, all services were moved off the interactive desktop into Session 0. hwnd and window manager operations are only effective inside a session and cross-session attempts to manipulate the hwnd will fail. For more information, see Session 0 Isolation.

If the SWP_SHOWWINDOW or SWP_HIDEWINDOW flag is set, the window cannot be moved or sized.

If you have changed certain window data using SetWindowLong, you must call SetWindowPos for the changes to take effect. Use the following combination for uFlags: SWP_NOMOVE | SWP_NOSIZE | SWP_NOZORDER | SWP_FRAMECHANGED.

A window can be made a topmost window either by setting the hWndInsertAfter parameter to HWND_TOPMOST and ensuring that the SWP_NOZORDER flag is not set, or by setting a window's position in the Z order so that it is above any existing topmost windows. When a non-topmost window is made topmost, its owned windows are also made topmost. Its owners, however, are not changed.

If neither the SWP_NOACTIVATE nor SWP_NOZORDER flag is specified (that is, when the application requests that a window be simultaneously activated and its position in the Z order changed), the value specified in hWndInsertAfter is used only in the following circumstances.

  • Neither the HWND_TOPMOST nor HWND_NOTOPMOST flag is specified in hWndInsertAfter.
  • The window identified by hWnd is not the active window.

An application cannot activate an inactive window without also bringing it to the top of the Z order. Applications can change an activated window's position in the Z order without restrictions, or it can activate a window and then move it to the top of the topmost or non-topmost windows.

If a topmost window is repositioned to the bottom (HWND_BOTTOM) of the Z order or after any non-topmost window, it is no longer topmost. When a topmost window is made non-topmost, its owners and its owned windows are also made non-topmost windows.

A non-topmost window can own a topmost window, but the reverse cannot occur. Any window (for example, a dialog box) owned by a topmost window is itself made a topmost window, to ensure that all owned windows stay above their owner.

If an application is not in the foreground, and should be in the foreground, it must call the SetForegroundWindow function.

To use SetWindowPos to bring a window to the top, the process that owns the window must have SetForegroundWindow permission.

Example

For an example, see Initializing a Dialog Box.

Function Information

Minimum DLL Version user32.dll
Header Declared in Winuser.h, include Windows.h
Import library User32.lib
Minimum operating systems Windows 95, Windows NT 3.1
Unicode Implemented as Unicode version.

See Also


Posted by +깡통+
이전버튼 1 이전버튼